delivery with no surprises. poweralia.com

RGCK01U CUSTOM

Buy your custom clamp
RGCK01U (132mm) series

Bar clamp characteristics:

Spacing: 132 mm between M10 rods
Maximum acceptable semiconductor capsule: Ø117 mm
Minimum recommended drilled hole in heatsink: Ø15 mm
Clamping force range: 2000-4800 kgF / 20-48 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€121.51

Datasheet

Availability

Available stock:0

Average lead time: 4 weeks

Price for 1 units or more	€121.51
Price for 6 units or more	€106.32

Custom price!

Price for 25 units or more

Product attribute	Attribute value
Accessory Type	Mounting
Fixing centers [mm]	132
Isolation voltage	2500V_RMS/1min
Maximum acceptable diameter between centers [mm]	117
Status	ACTIVE

Product attribute	Attribute value
Country of origin	Spain
RoHS Compliance	YES
UL Recognized	UL 94V-0
Tariff code	85049099

Datasheet

You may also like...

Buy your custom clamp
RGCK01N (102mm) series

Bar clamp characteristics:

Spacing: 102 mm between M8 rods
Maximum acceptable semiconductor capsule: Ø89 mm
Minimum recommended drilled hole in heatsink: Ø13 mm
Clamping force range: 300-3000 kgF / 3-30 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€109.78

See details

Buy your custom clamp
RGCK01L (100mm) series

Bar clamp characteristics:

Spacing: 100 mm between M8 rods
Maximum acceptable semiconductor capsule: Ø87 mm
Minimum recommended drilled hole in heatsink: Ø13 mm
Clamping force range: 300-3000 kgF / 3-30 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€104.77

See details

Buy your custom clamp
RGCK01D (70mm) series

Bar clamp characteristics:

Spacing: 70 mm between M8 rods
Maximum acceptable semiconductor capsule: Ø57 mm
Minimum recommended drilled hole in heatsink: 13 mm
Clamping force range: 300-1000 kgF / 3-10 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€86.19

See details

Buy your custom clamp
RGCK01Y (140mm) series

Bar clamp characteristics:

Spacing: 140 mm between M10 rods
Maximum acceptable semiconductor capsule: Ø125 mm
Minimum recommended drilled hole in heatsink: Ø15 mm
Clamping force range: 2000-6500 kgF / 20-65 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€126.75

See details

Buy your custom clamp
RGCK01F (89mm) series

Bar clamp characteristics:

Spacing: 89 mm between M8 rods
Maximum acceptable semiconductor capsule: Ø76 mm
Minimum recommended drilled hole in heatsink: Ø13 mm
Clamping force range: 300-3000 kgF / 3-30 kN

Please indicate at the end of the order (order comments box) the following information:

Clamping force. According on press-pack semiconductor datasheet. Expressed in [kgF] or [kN]
M size of clamping. This size is the result of the addition of two heatsinks and semiconductor height. Expressed in [mm]

€100.99

See details